Thanks all.
Anyone who wants to build this plane will have the option of either an LVG or Gotha built. I have chosen the LVG MoRoTaS. You have to drill holes for new control cable guides and remove the ones for the Gotha.
Any one who reads this and has one, decide which one your are going to do and take care of this first. You have to drill some pretty big holes for the new guides and they will protrude into the fuselage quite a bit.
I did not realize that until it was too late and it was going to look hideous with those studs and now way to sand them down and make flush.
Would have been better if they would just have modled all the guides on the fuselage halves and you just sand the ones not needed down flush.
I will just have to use the guides for the Gotha build and truck on along.
No one is too blame but me. Now with that out of the way, on to the pictures.
I also found out after gluing the 2 sides together that I was left with a crease facing inwards on the bottom. My advice is to shim the bottom before gluing. 2 cut off sanding sticks worked perfect for me.
Been working on the engines. I plane to leave the cowls of one engine so I made some plugs out of this plastic rod and used eduard ignition wires.
I used this tape for the wrap, applied thin putty on top of tape and painted black.
Thats all for now, take care.