jknaus
Administrator
Lukasz at Taurus Models has just produced some very cool attaching hardware. Its for WWI aircraft but I'm sure you will find it useful for anything. Note the match head used for scale :evil:
http://www.taurusmodels.pl/
M0001 Round-head screws 40 pieces
Diameter: 0.29mm
M0002 Round-head screws 40 pieces
Diameter: 0.35mm
M0003 Round-head screws 40 pieces
Diameter: 0.42mm
M0004 Round-head screws 40 pieces
Diameter: 0.5mm
M0005 Round-head screws 40 pieces
Diameter: 0.55mm
Picture the same as last two.
Bolts with hex nuts on washers 40 pieces
Diameter: 0.45mm
Wing nuts 10 pieces Diameter: 1.7/0.5/0.3mm
Wing nuts 10 pieces Diameter: 1.8/0.6/0.35mm
Threaded rods 10 pieces Diameter: 0.35mm, length: 3.1mm
Wing nuts with threaded rods 10 sets Diameter: 1.8/0.6/0.35mm
By the way I have used his spark plugs for my vehicles as well. Enjoy.
James
http://www.taurusmodels.pl/
M0001 Round-head screws 40 pieces
Diameter: 0.29mm
M0002 Round-head screws 40 pieces
Diameter: 0.35mm
M0003 Round-head screws 40 pieces
Diameter: 0.42mm
M0004 Round-head screws 40 pieces
Diameter: 0.5mm
M0005 Round-head screws 40 pieces
Diameter: 0.55mm
Picture the same as last two.
Bolts with hex nuts on washers 40 pieces
Diameter: 0.45mm
Wing nuts 10 pieces Diameter: 1.7/0.5/0.3mm
Wing nuts 10 pieces Diameter: 1.8/0.6/0.35mm
Threaded rods 10 pieces Diameter: 0.35mm, length: 3.1mm
Wing nuts with threaded rods 10 sets Diameter: 1.8/0.6/0.35mm
By the way I have used his spark plugs for my vehicles as well. Enjoy.
James