I saw a fellow modeler in our club using this yesterday. So I decided to make my own. Items needed:
1. Cheap electric tooth brush
2. Sanding paper per your choice
3. Double sided tape
Its easy to make.
1. Cut off bristles
2. apply sanding paper to tape
3. apply tape to tooth brush
4. Trim excessive tape/sand paper.
I used it with 400 grit on an old model and I was able to sand of the sprue remains on a grab handle.
Joe
1. Cheap electric tooth brush
2. Sanding paper per your choice
3. Double sided tape
Its easy to make.
1. Cut off bristles
2. apply sanding paper to tape
3. apply tape to tooth brush
4. Trim excessive tape/sand paper.
I used it with 400 grit on an old model and I was able to sand of the sprue remains on a grab handle.
Joe