Welcome, Guest
Username: Password: Remember me

TOPIC: Looking For A 1/35 Scale Horse Collar

Looking For A 1/35 Scale Horse Collar 07 Oct 2016 16:00 #1

Alright hockey fans, I'm looking for a source for a 1/35 scale horse collar. Along the lines of this one.



Can anyone point me in the right direction, please? Thanks in advance!

:drinks
IPMS Plastic Surgeon (satellite member)

Resident Curmudgeon

The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 08 Oct 2016 21:03 #2

I got that field kitchen kit, you think one is in there?
I told you photobucket sucks...



"If you don't like it why don't you just let it be"
Hank Williams Jr.
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 08 Oct 2016 21:09 #3

There's not one in the Tamiya Field Kitchen, I looked some online to no avail. I've seen one somewhere, just can't recall which kit.
IPMS Plastic Surgeon (satellite member)

Resident Curmudgeon

The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 08 Oct 2016 21:58 #4

You might need to make it, this is the closest I found.


Saúl Garcí­a
They say I'm crazy but I have a good time
I'm just looking for clues at the scene of the crime
Life's been good to me so far
Lucky I'm sane after all I've been through
(Everybody say I'm cool) (He's cool)
I can't complain but sometimes I still do
Life's been good to me so far...


Last Edit: 08 Oct 2016 22:04 by sharkmouth.
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 09 Oct 2016 01:57 #5

1/35 is awfully large for me. :huh: I try to womp one up for you! :gogo 1/350 Orca is going well, and the master/mold for SSN-509 USS Tigerfish isn't ready yet. A little solder...... A bit of copper wire..... Some Tamiya putty..... Hmmm.
  • Rhino
  • Rhino
  • OFFLINE
  • Division Commander
    Division Commander
  • Posts: 1636
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 09 Oct 2016 06:17 #6

Would some 18 or 20 Guage wire with a miliput collar work? Might be easy enough to make. Or do you need the whole horse?
  • jknaus
  • jknaus
  • OFFLINE
  • Air Marshall
    Air Marshall
  • Posts: 17793

The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 11 Oct 2016 18:40 #7

I got one with a farm set I bought years ago. I'll look and see if I still hav e the horse collar here from that set. If I do have it's yours.

Cheers
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 11 Oct 2016 21:46 #8

Thanks for the responses, guys! I had seen that Medi Wagon, that collar is a little thinner than what I was looking for. Had thought I had seen one in a kit somewhere. but it could have been one of those should have opened the window while using turpentine induced dreams. If you find yours, Peter, I'd be glad to trade or at least pay the postage. Thanks again. :good
IPMS Plastic Surgeon (satellite member)

Resident Curmudgeon

The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 11 Oct 2016 22:40 #9

They may be a bit ornate but the Budweiser Clydesdales has 8 of them. :drink
I told you photobucket sucks...



"If you don't like it why don't you just let it be"
Hank Williams Jr.
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 12 Oct 2016 02:13 #10

Iron Mike wrote:
Thanks for the responses, guys! I had seen that Medi Wagon, that collar is a little thinner than what I was looking for. Had thought I had seen one in a kit somewhere. but it could have been one of those should have opened the window while using turpentine induced dreams. If you find yours, Peter, I'd be glad to trade or at least pay the postage. Thanks again. :good

Good news Iron Mike.

I found the horse collar. It's pretty simple in detail but it's yours if you send me an email with your addy in it. No worries about postage. It's what a lot of use do here = donate parts to those in need.

Cheers
The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 12 Oct 2016 08:27 #11

Thank you, Peter, PM sent.

Bob, I'm pretty sure the Clydesdale team was 1/20 scale.
IPMS Plastic Surgeon (satellite member)

Resident Curmudgeon

The administrator has disabled public write access.

Looking For A 1/35 Scale Horse Collar 12 Oct 2016 20:18 #12

Just tryin' to help a brother out...:drinks
I told you photobucket sucks...



"If you don't like it why don't you just let it be"
Hank Williams Jr.
The administrator has disabled public write access.
Time to create page: 0.734 seconds